The NexSys® control system is the latest in a long line of reliable, easy to use controllers from Lakewood Instruments. The NexSys® control system uses the latest in microprocessor technology with a 5.7” Color Touch Screen interface for a high level of application flexibility. All features, parameters, settings, and functional
requirements to operate, program, and monitor the NexSys® control system are accessible from the touch screen and DO NOT require the use of an external input, PC or device to operate or access.
The NexSys® control system even includes On-Board Help Screens with wiring, programming, and maintenance instructions.
This specific model includes:
The NexSys® control system comes standard with the following system interfaces and DMX outputs:
LON EIA 709 FTT10, BACnet IP, and MODbus TCP. The unit comes from the factory ready to integrate readings into a BAS, including: The state of any installed relay (On/Off) , Water meter readings, Conductivity readings, Additional sensor readings (ph, ORP), sensor alarms, Additional 4-20mA input readings, Flow condition, and other digital inputs.
The NexSys® control system comes standard with Ethernet capability through a browser (HTML5) interface that allows 100% access to all features and control parameters of the controller.
The NexSys® control system has an astounding
array of built-in features such as:
• LonWorks, MODbus, and BACnet communications interface
• Ethernet capability through an HTML interface
• The capability to send E-service reports to a subscribed service
• The ability to display operating values with time and date stamps on color coded graphs with zoom and scroll features
• Up to eight active sensor inputs: 2 tower cond, 2 M/U cond, pH and ORP
Trace chemistry capable
• Two water meter inputs with field expansion capability to four
• Enclosure is NEMA 4X rated
• Two flow switch inputs configurable to any relay output
• Ability to add up to eight 4-20mA input readings
• Ability to add four digital inputs
• Ability to mount every sensor/input up to 400 meters away from the controller via 4-wire twisted pair
• Ability to control the chemistry in two towers at the same time
• Six relay outputs expandable to ten relay outputs for user configurable operations such as:
Touch Screen Interface:
5.7” diagonal viewing area
Display size: 115X86 mm
Color: TFT 65536
Backlight: LED or CCFL
Power: 120/240 VAC 50/60 Hz
120VAC 3A per relay 15A total
Enclosure: NEMA 4X, ETL
Includes 1575e with cooling tower Left Exit flowswitch and sensor
The Model 1575e uses the latest in microprocessor capability,
giving the user a high level of application flexibility. A large
illuminated graphics screen, multiple inputs, and very easy setup
characterize this new technology. The Model 1575e is ETL
Cooling Tower Water Treatment Controller, Including Flow Switch Plumbing
And Conductivity Sensor On A Mounting Plate
output, and a 4-20 mA input are all standard features.
conductivity, pH, ORP, percent, pressure, milliamps, flow rates, or traced chemistry control. This transmitter
can be added in the field.
easy programming. Steel domed switches improve the tactile sensing and life expectancy of the keypad.
Conductivity range 50-10,000 μS
Conductivity sensor 2 electrode
Conductivity Resolution ± 10 μS (conductivity <5000 μS)
±100 μS(conductivity > 5000 μS)
Temperature comp. 500NTC, NONE
Accuracy & repeatability ± 1.0%
Auto/Manual outputs Menu selectable
Keypad 16 tactile push-buttons
Display illuminated 128x64 pixel LCD
Drum Switch Inputs 2 digital contact inputs
Water meter inputs (2) 2 digital contact inputs. Contact head, paddle wheel, or turbine
Timers Max. blowdown time exceeded and relay run time exceeded
Output Signal One 4 – 20 mA, isolated or non-isolated optionally powered output for conductivity
Input Signal One 4-20 mA, non- isolated internally powered input for conductivity
Output Four (4) relays. 3 for selectable use, 1 for blowdown.
Relay ratings 3A each, 10A total
Power 120/240 VAC 50/60 Hz
Ambient 32° - 120°F (0 - 49°C)
Enclosure NEMA 4X, ETL
Sensors/Plumbing Cooling Tower
Max Pressure 140 psi (9.65 bar)@ 100 °F
Max Temp 140°F (60°C)
Min flow 1 gpm (3.785 Lpm)
$ 366.00 $ 399.00
The Yamatho Coupon Rack Kit allows for an economical way to build a corrosion coupon rack. The kit comes complete with everything you need (including Teflon tape) to assemble your own coupon rack.
The corrosion test rack simplifies the procedure for establishing a corrosion monitoring program. The coupon rack kit consists of ¾” or 1” threaded PVC schedule 40 clear PVC pipe and PVC fittings. The kit is easily assembled via threaded connections and an easy to follow instruction guide. This kit also includes (4) foam covers to minimize exposure to sunlight.
Four test coupon holders are provided so that multi-metallic systems can be tested. An inline 5 or 12 GPM Eddington flow regulator is incorporated into the assembly for
maintaining constant water velocity. A variable in-line flow meter is also available as an option for critical measurement of water velocities. An optional clear Y-strainer is available to help maintain water velocity through the flow meter and pipe rack.
The corrosion test rack is designed according to ASTM designation D2688-70 which specifies the monitoring of corrosivity of water in the absence of heat transfer (weight loss methods).
Made in the USA.
Order your coupons here!
Need water analysis products? Check them out here
Need a blowdown valve? Check out the YS20S from Yamatho
¾” or 1”clear PVC, four station coupon rack.
Construction: ¾” or 1” clear threaded PVC sch. 40 pipe and standard Sch, 80 PVC fittings.
Dimensions: 24” H x 30” W.
Flow regulator: 5 GPM for 3/4″ kit or 10 GPM for 1″ kit Nickel Plated Steel Eddington flow regulator.
Coupon holders: 4 coupon holders with stainless steel hardware.
Foam covers: 4 foam covers for clear PVC pipe to minimize exposure to light.
Other Construction materials available: