Add Products to the Cart to Obtain Instant Discounts!

Boiler water TDS, controller Lakewood model 150

1269093

1 review

$ 2,435.00

Question? Call us:+1-800-613-2974

Email us: Sales@yamathosupply.com

The boiler water TDS controller model 150 use the latest in microprocessor capability, giving the user a high level of application flexibility. Multiple inputs and very easy setup characterize this new technology. Make sure you order the controller with the conductivity sensor (indirect measurement of TDS), orifice plate and orifice plate holder. A motorized blowdown valve is needed for the automation.

These boilers water TDS controllers can be used in the Continuous Sample, Sample/Cycle, or Sample/Hold modes to control the boiler water conductivity.

From the drop down, please add sensor, orifice and union, and the motorized ball valve

Change from Mobile to Full Web Site to be able to select the required option!

  • Part Number 1269089 is just the Model 150 Controller
  • Part Number 1269092 is Automated Kit for 1/2" pipes - Includes 150 Controller+SR2 Sensor+1/2" Union+Orifice plate
  • Part Number 1269260 is Automated Kit for 3/4" pipes - Includes 150 Controller+SR2 Sensor+3/4" Union+Orifice plate
  • Part Number 1269093 is for Continuous Sampling - Includes 150 Controller+SR2 Sensor+PLKT 3/4"  (The PLKT Plumbing Kit Includes sample/cycle and continuous sample kit. Unions, Orifice plates+Cross+Tees+and Manual Block Valve Only. (Does not include piping.)

 Use these Boiler Water TDS Controller for conductivity control of boilers. It can be used for Continuous Sample, Sample/Cycle, or Sample/Hold control of boiler conductivity.

• Removable power cord and receptacles for simple conduit installations.

• One (1) water meter input, conductivity input, flow switch input, and 4-20 mA output are all standard features.

• Designed with a single circuit board for better reliability and lower cost.

• Large open shallow enclosure for easy wiring.

• The enclosure is rated NEMA 4X.

• Power selector switch for 115 or 230 vac operation.

• Heavy-duty stainless steel domed numeric keypad and illuminated graphical display allow for quick and easy programming. Steel domed switches improve the tactile sensing and life expectancy of the keypad.

• LED indicators for power, alarm and relay status.

• The display is lit by two LEDs when any key is pressed.

 Easy to program, the boiler conductivity controllers Model 150 use an intuitive menu and a numeric keypad for programming.

• No add-on options. Flow switch input, 4-20mA output, and three boiler conductivity control methods; Continuous Sample, Sample/Cycle, and Sample/Hold are standard.

• Single circuit board design improves reliability.

  Multiple methods of chemical feed for application flexibility.

 

Conductivity range 100-10,000 μS Conductivity sensor 2 electrode Conductivity Resolution ± 10 μS Accuracy & repeatability ± 1.0% Deadband/Setpoint Adjustable Auto/Manual outputs Menu selectable Output relays 2 selectable use and 1 for blowdown Keypad 16 tactile push-buttons Display 16 X 2 Character Water meter input Contact head, paddle wheel or turbine Timer Max. blowdown time exceeded, relay time exceeded Output Signal One 4 – 20 mA, non-isolated powered output Relay ratings 3A each, 10A total Power 120/240 VAC 50/60 Hz Ambient 32° - 120°F (0 - 49°C) Enclosure NEMA 4X CSA and ANSI/UL  

 

 

Customer Reviews
5.0 Based on 1 Reviews
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
WR
11/09/2020
Wally R.
United States United States
Extremely easy to install

Selecting and ordering was easy and simple. We selected to pay in 6 monthly payments with no interest, which was done through Klarna and was simple enough. We received the controller properly packed and we proceed to install immediately. It was very easy. We have used these controllers before and they are very reliable and simple to operate. Very happy with the purchase.


Click to edit the product in Ali Orders.
Note: only show for shop owner