Accessories

DESCRIPTION

The Flow Regulator (Dole valve) is designed to deliver a constant volume of water flow over a wide pressure drop range. The constant flow of water is maintained by the use of the flexible orifice. The flow rate is maintained to within ± 15% between 15 and 125 psi. The flow rate varies due to manufacturing tolerances and water temperature. We manufacture flow regulators in various materials such as Nickel Plated Brass, Type 316 SS, and PVC. Flow Regulators come in various flow rates and are 3/8”, ½”, ¾”, 1” FNPT, and 1 ¼”, 1 ½”, 2”, 2 ½”, and 3” MNPT and flow rates range from 0.5 to 120 Gallon per minute (GPM). We also use labels that provide extra-strong protection for harsh environments and conditions. They are constructed from durable polyester that is water resistant and tear resistant providing durable and secure protection. All Flow Regulators are marked with an arrow indicating direction of flow. To ensure proper operation, always install regulator with the arrow pointed downstream.

APPLICATIONS

• Cooling towers
• Water softeners
• Tankless heaters
• Water filters
• Ground water heat pumps
• Irrigation systems
• Pumps (well and packing water)
• Drinking fountains
• Water purifiers

 MATERIALS

• PVC, stainless steel, lead free nickel plated brass
• Sizes: 3/8”, ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2, 2 ½”, 3”, NPT
• Rubber orifice: Buna, Viton, EPDM
• Custom connections, materials and sizes available
• Lead free (LF) (sizes 1" and smaller)

View full product details »

Description

Injection nozzle designed to assure the correct introduction of chemicals in the system. With safety features that allow the installation and removal under pressure. This device can introduce the chemical at the right location inside the system pipe.

Features

Protection chain to prevent the Nozzle Assembly from being completely withdrawn before Corporation

Stop is closed and is a safety feature to protect against back pressure

Built-in check valves to prevent backflow of water or steam through the nozzle and into the chemical line.

Specifications

Operating pressures to 150 psi (Kynar, Alloy 20, SS316), 125 psi (CPVC)

Quill available in: Corrosion-resistant CPVC, 316 Stainless Steel and Alloy 20

Corporation Stop (brass only) available with ¾” or 1” process connections Contact Us for a quote.

Quill connection ½” female all models

High pressure, high temperature application

Simple to use ½”, ¾”, or 1” NPT male process connection and

½”, ¾”, or 1” NPT male chemical inlet connection

Built-in check valves to prevent backflow of water or steam through the nozzle and into the chemical line.

Two machined flat surfaces on external portion of nozzle so a wrench can be used during installation

Telltale to ensure proper nozzle alignment with process steam for proper dispersal of injected chemical

Also available CPVC, Alloy 20 and  Hastelloy

Made in the USA

View full product details »

DESCRIPTION

The Flow Regulator (Dole valve) is designed to deliver a constant volume of water flow over a wide pressure drop range. The constant flow of water is maintained by the use of the flexible orifice. The flow rate is maintained to within ± 15% between 15 and 125 psi. The flow rate varies due to manufacturing tolerances and water temperature. We manufacture flow regulators in various materials such as Nickel Plated Brass, Type 316 SS, and PVC. Flow Regulators come in various flow rates and are 3/8”, ½”, ¾”, 1” FNPT, and 1 ¼”, 1 ½”, 2”, 2 ½”, and 3” MNPT and flow rates range from 0.5 to 120 Gallon per minute (GPM). We also use labels that provide extra-strong protection for harsh environments and conditions. They are constructed from durable polyester that is water resistant and tear resistant providing durable and secure protection. All Flow Regulators are marked with an arrow indicating direction of flow. To ensure proper operation, always install regulator with the arrow pointed downstream.

 APPLICATIONS

• Cooling towers
• Water softeners
• Tankless heaters
• Water filters
• Ground water heat pumps
• Irrigation systems
• Pumps (well and packing water)
• Drinking fountains
• Water purifiers

 MATERIALS

• Stainless steel 316
• Sizes: 3/8”, ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2, 2 ½”, 3”, NPT
• Rubber orifice: Buna, Viton, EPDM
• Custom connections, materials and sizes available
• Lead free (LF) available

View full product details »

DESCRIPTION

The Yamatho Coupon Rack Kit allows for an economical way to build a corrosion coupon rack.  The kit comes complete with everything you need (including Teflon tape) to assemble your own coupon rack.

The corrosion test rack simplifies the procedure for establishing a corrosion monitoring program. The coupon rack kit consists of ¾” or 1” threaded PVC schedule 40 clear PVC pipe and PVC fittings. The kit is easily assembled via threaded connections and an easy to follow instruction guide. This kit also includes (4) foam covers to minimize exposure to sunlight.

Four test coupon holders are provided so that multi-metallic systems can be tested. An inline 5 or 12 GPM Eddington flow regulator is incorporated into the assembly for
maintaining constant water velocity. A variable in-line flow meter is also available as an option for critical measurement of water velocities. An optional clear Y-strainer is available to help maintain water velocity through the flow meter and pipe rack.

The corrosion test rack is designed according to ASTM designation D2688-70 which specifies the monitoring of corrosivity of water in the absence of heat transfer (weight loss methods).

Made in the USA.

Order your coupons here!

Need water analysis products? Check them out here

APPLICATIONS

Need a cooling controller? Check the 140, 1575e or NexSys 

Need a solenoid pump? Check out the AML 200,  AKL 603, AKL 800 or AKL 803 

Need a blowdown valve? Check out the YS20S from Yamatho

SPECIFICATIONS

¾” or 1”clear PVC, four station coupon rack.

Construction: ¾” or 1” clear threaded PVC sch. 40 pipe and standard Sch, 80 PVC fittings.

Dimensions: 24” H x 30” W.

Flow regulator: 5 GPM for 3/4″ kit or 10 GPM for 1″ kit Nickel Plated Steel Eddington flow regulator.

Coupon holders: 4 coupon holders with stainless steel hardware.

Foam covers: 4 foam covers for clear PVC pipe to minimize exposure to light.

Other Construction materials available:

View full product details »

DESCRIPTION

Injection quills are designed to ensure a more uniform and rapid dispersal of injection chemicals into the center stream of a process pipeline. This prevents corrosive liquids from clinging to the side of the pipe. The Duplex Injection Quill allows multiple chemicals to be inserted simultaneously. Duplex Injection Quills are primarily made from 316 Stainless Steel, but other materials are available. Pressure and temperature are dependent on the material of construction and vary from 100 °F (37 °C) to 500 °F (260 °C) at 1000 psi max.

Injection nozzle allows for proper injection into liquid, gas or mixed phase system

Nozzles can be removed for inspection without system shutdown Adjustable quill permits precise positioning of quill in fluid flow and restrains stinger

during insertion/removal

APPLICATION

• Available in larger sizes, up to 3” MNPT connection
• Welded safety collar
• Also available CPVC, Alloy 20 Hastelloy
• Made in the USA

FEATURES

Wetted Parts: Type 316 stainless steel

Packing: Graphite (maximum temperature - 700 °F)

materials

Process Connection

• ¾” or 1” MNPT (standard)
• Quill, ¼” pipe
• Pressure rating: 300 psi

Specifications

Chemical Inlet Connections

• ¼” MNPT chemical inlet connection
• ¼” FNPT chemical inlet connection

Process Connection

• ½” or ¾” MNPT process connection

Material

• 316 stainless steel construction
• Other materials available upon request

View full product details »

 DESCRIPTION

Get the torque that you deserve! The Yamatho YSCN valves are high quality and high torque, capable of handling your tougher water application. With the same valve body of the proven YS160, the YSCN adds almost double the torque. With a metal actuator housing, smaller size actuator and, more configurations. This is a high quality, high torque motorized PVC ball valve, with position feedback.

 Click on the icon to download the data sheet

DETAILS 

Includes:
 Control feedback model
 Housing rated IP67
 High performance brushless motor,overheat/overload protection
 Long lasting operating life ( 20,000 open/close cycles)
 Valve Body Description
 Pressure Rating: 150 psi @ 74 Deg F
 Adjustable seat tighteness
 Easy to disasemble
※ For AC series,it is not recommended to use two or more actuators in parallel

WIRING

SPECIFICATIONS

Actuator

Valves

View full product details »

The most reliable and simple Glycol Feeder in the market.

FEATURES

TANK : 55 gallon polyethylene tank with a PE cover. The Tank is fully supported and restrained by a carbon

steel bottom mount stand. Stand painted with enamel paint

GEAR PUMP: 1/2 HP gear pump provides steady and even flow against pressure with an internal

pressure relief bypass valve. Pump suction plumbing includes PVC drain valve, flexible tubing and Y-strainer.

Pump discharge tubing includes brass check valve

ELECTRICAL: 115 Volt AC power cord, 8’ L

PIPING: ½” sch 80 PVC piping and schedule 40 brass piping

DIMENSIONS: 23”L x 23”W x 62”H

SYSTEM CONNECTION: ¾” Brass FNPT, model #GL-50-M-E

Made in the USA

SPECIFICATIONS

GEAR PUMP: 1/2 HP gear pump.

Provides steady and even flow against pressure with an internal

pressure relief bypass valve. Pump suction plumbing includes PVC

drain valve, flexible tubing and Y-strainer. Pump discharge tubing

includes PVC ball valve, brass check valve, brass piping and ¼” NPT

pressure gauge

TANK : 55 gallon polyethylene tank with a PE cover. Tank is fully

supported and restrained by a carbon steel bottom mount stand.

Stand painted with water-based enamel

CONTROL PANEL: The NEMA 4X control panel comes standard

with 115V power cord. The control panel includes 3 position

(hand-off-auto), switch and light for main power, low level light and

15 AMP fuse

LOW LEVEL SWITCH: Polypropylene side entering low level switch

with 10 AMP relay

PRESSURE SWITCH: ¼” NPT pressure switch

PRESSURE RELIEF VALVE : 5-150 PSI

SYSTEM CONNECTION: ¾” Brass FNPT

View full product details »