- Continue Shopping
- Your Cart is Empty
Corrosion coupon rack kit
$ 574.00
DESCRIPTION
The Yamatho Coupon Rack Kit allows for an economical way to build a corrosion coupon rack. The kit comes complete with everything you need (including Teflon tape) to assemble your own coupon rack.
The corrosion test rack simplifies the procedure for establishing a corrosion monitoring program. The coupon rack kit consists of ¾” or 1” threaded PVC schedule 40 clear PVC pipe and PVC fittings. The kit is easily assembled via threaded connections and an easy to follow instruction guide. This kit also includes (4) foam covers to minimize exposure to sunlight.
Four test coupon holders are provided so that multi-metallic systems can be tested. An inline 5 or 12 GPM Eddington flow regulator is incorporated into the assembly for
maintaining constant water velocity. A variable in-line flow meter is also available as an option for critical measurement of water velocities. An optional clear Y-strainer is available to help maintain water velocity through the flow meter and pipe rack.
The corrosion test rack is designed according to ASTM designation D2688-70 which specifies the monitoring of corrosivity of water in the absence of heat transfer (weight loss methods).
Made in the USA.
Order your coupons here!
Need water analysis products? Check them out here
Need a cooling controller? Check the 140, 1575e or NexSys
Need a solenoid pump? Check out the AML 200, AKL 603, AKL 800 or AKL 803
Need a blowdown valve? Check out the YS20S from Yamatho
¾” or 1”clear PVC, four station coupon rack.
Construction: ¾” or 1” clear threaded PVC sch. 40 pipe and standard Sch, 80 PVC fittings.
Dimensions: 24” H x 30” W.
Flow regulator: 5 GPM for 3/4″ kit or 10 GPM for 1″ kit Nickel Plated Steel Eddington flow regulator.
Coupon holders: 4 coupon holders with stainless steel hardware.
Foam covers: 4 foam covers for clear PVC pipe to minimize exposure to light.
Other Construction materials available:
Customer Reviews
Related Items
Corporation Stop - for chemical injection in pressurized lines
$ 164.00 $ 190.00
Description
Injection nozzle designed to assure the correct introduction of chemicals in the system. With safety features that allow the installation and removal under pressure. This device can introduce the chemical at the right location inside the system pipe.
Features
Protection chain to prevent the Nozzle Assembly from being completely withdrawn before Corporation
Stop is closed and is a safety feature to protect against back pressure
Built-in check valves to prevent backflow of water or steam through the nozzle and into the chemical line.
Specifications
Operating pressures to 150 psi (Kynar, Alloy 20, SS316), 125 psi (CPVC)
Quill available in: Corrosion-resistant CPVC, 316 Stainless Steel and Alloy 20
Corporation Stop (brass only) available with ¾” or 1” process connections Contact Us for a quote.
Quill connection ½” female all models
High pressure, high temperature application
Simple to use ½”, ¾”, or 1” NPT male process connection and
½”, ¾”, or 1” NPT male chemical inlet connection
Built-in check valves to prevent backflow of water or steam through the nozzle and into the chemical line.
Two machined flat surfaces on external portion of nozzle so a wrench can be used during installation
Telltale to ensure proper nozzle alignment with process steam for proper dispersal of injected chemical
Also available CPVC, Alloy 20 and Hastelloy
Made in the USA
Flow regulator (Dole valve), FNPT SS316 1.0 to 30 GPM with Buna orifice
$ 174.00 $ 190.00
DESCRIPTION
The Flow Regulator (Dole valve) is designed to deliver a constant volume of water flow over a wide pressure drop range. The constant flow of water is maintained by the use of the flexible orifice. The flow rate is maintained to within ± 15% between 15 and 125 psi. The flow rate varies due to manufacturing tolerances and water temperature. We manufacture flow regulators in various materials such as Nickel Plated Brass, Type 316 SS, and PVC. Flow Regulators come in various flow rates and are 3/8”, ½”, ¾”, 1” FNPT, and 1 ¼”, 1 ½”, 2”, 2 ½”, and 3” MNPT and flow rates range from 0.5 to 120 Gallon per minute (GPM). We also use labels that provide extra-strong protection for harsh environments and conditions. They are constructed from durable polyester that is water resistant and tear resistant providing durable and secure protection. All Flow Regulators are marked with an arrow indicating direction of flow. To ensure proper operation, always install regulator with the arrow pointed downstream.
APPLICATIONS
- Cooling towers
- Water softeners
- Tankless heaters
- Water filters
- Ground water heat pumps
- Irrigation systems
- Pumps (well and packing water)
- Drinking fountains
- Water purifiers
MATERIALS
- Stainless steel 316
- Sizes: 3/8”, ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2, 2 ½”, 3”, NPT
- Rubber orifice: Buna, Viton, EPDM
- Custom connections, materials and sizes available
- Lead free (LF) available
Footer
Main Menu
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2020 Yamatho Supply. Designed by Out of the Sandbox. Powered by Shopify
