The water TDS controller for cooling towers should be simple and easy to operate. The key parameter to control is the concentration of dissolved solids, which we do through the control of the water TDS. The water TDS controller for cooling towers Lakewood model 140 is a simple as that. Simplicity drives reliability and easy operation. Connect a water flow meter and now you can feed the chemicals based on water reposition or blowdown flow. Blowdown valve, water meter, and pumps are sold separately.
"Install a water cooling tower controller to automatically control blowdown. Work with a specialist to determine the maximum cycles of concentration the cooling tower system can safely achieve and the resulting conductivity (typically measured as micro Siemens per centimeter, µS/cm). A water cooling tower or, conductivity, controller can continuously measure the conductivity (indirect measurement of TDS) of the cooling tower water and discharge water only when the conductivity set point is exceeded. "
Use this water cooling tower controller for cooling towers.
Removable power cord and receptacles for simple conduit installations.
Scheduled feed, which can use two relays for biocides or other chemicals.
One (1) water meter input, conductivity input, flow switch input, and 4-20 mA output are all standard features.
Designed with a single circuit board for better reliability and lower cost.
Large open shallow enclosure for easy wiring.
The enclosure is rated NEMA 4X.
Power selector switch for 115 or 230 vac operation.
Heavy-duty stainless steel domed numeric keypad and illuminated graphical display allow for quick and easy programming. Steel domed switches improve the tactile sensing and life expectancy of the keypad.
