Seko's Kontrol K100PR pH for water treatment with RS485 MODBUS RTU/ASCII

Single-parameter control instrument

The Kontrol 100-series are advanced controllers designed for simpler high-end applications. The units feature an independent proportional control output (PID), probe quality checking and a variety of outputs . The user has full programming authority and the unit can be accessed remotely through ModBus RTU/ASCII

This part includes:

• Kontroller K100PR p/n K100PRPMA000
• IP67 Box p/n 9900107331
• Probe header with flowmeter p/n 9900103047
• pH sensor 5pH-1-56 p/n 9900105002
• Cable p/n 9900109003

pH sensor 0 ÷14,00 pH  Accuracy ±0,01pH

pH 0 ÷14,00 pH ±0,01pH Graphic display and Keypad

128 by 128 pixel resolution monochrome display with graphic icons to show digital output status, washing cycle, alarms with red backlight.

Simultaneous flashing values for the measurement (numeric + paragraph) and temperature readings.

Five control keys for instrument calibration and configuration.

Enclosure Box and Power Supply

Wall mounting ABS plastic material IP65 full box (144x144x122)

Panel mounting ABS IP65 front panel only (96x96x42)

Universal Power Supply 100÷240 Vac 50/60 Hz

Low Power Supply 12÷32 Vdc or 24 Vac

Current outputs with Galvanic isolation

4÷20mA output

Two independent programmable Output Measures with Proportional routine regulation.

Relay Outputs

Two independent relais, two set points, alarm remote and back washing probe setting by software.

On/OFF, Timed and Proportional (PWM) routine function setting.

Solid State Relay (SSR)

Two Frequency output signal, two set points.

Snail Lock fixing system

Quick connection for panel mounting version.

Communication Features

Serial Output RS485 MODBUS RTU/ASCII

• Waste Water

• Drinking Water

• Pure Water

• Cooling Towers

• Boiler

• Reverse Osmosis

• Crate Wash

• Galvanic Process

• CIP

• Irrigation

• Swimming Pool

• Sea water

• Dairy