The 1520e Uses the Lakewood Instruments 520 Series Sensors. For pH Part Number 1167302 pH Replacement Sensor Tip Shown
1167162 SENSOR BOILER -SR
The 2-ELECTRODE BOILER SENSOR is used for monitoring conductivity
in a boiler blowdown line. The 2-electrode boiler sensor
cannot be used after a sample cooler.
Body 316 SS
Electrodes 416 SS
Max Pressure 600 psi (41.4 bar)
Max Temperature 486°F (252°C)
Cable 20 ft High temp
Process thread 3⁄4 inch MNPT
Conduit connection 3⁄4 inch MNPT
$ 1,359.00 $ 1,674.00
Lakewood 150 Boiler Surface Blowdown Controller with; SR2 Conductivity Sensor, 1/2 Union, and orifice plate. All you need is to order a 1/2" Motorized Blowdown Valve (p/n 1269179), and you are ready to go!
The Model 150 can be used in the Continuous Sample, Sample/ Cycle, or Sample/Hold modes to control the boiler water conductivity. It can also generate a 4/20mA signal to a remotely located conductivity indicator, measure and accumulate boiler's feedwater flow, and feed chemicals to the boiler.