$ 217.00 $ 224.25
Max Pressure: 145 psi What is this?
Max Flow Rate: Adj. from 0 to 1.3 GPH (@ 120 psi) What is this?
Power: 110 VAC and 220 VAC, or 24 VDC
Control: Manual What is this?
Pump Type: Diaphragm
Box contains: complete pump, injection valve, foot valve and 6 ft (each) of suction and discharge tubing. Wall mounting bracket and floor stand.
Simplify is our way of making it easier for you to decide if this is the correct chemical injection pump for you. Make sure the wet materials are compatible with the chemical (use compatibility chart here), the pump can achieve the maximum pressure and flow rate, it can use the power source available and, the control is the one you need for your application. Anything else is "bells and whistle"
Seko S.p.a is a global pump manufacturer founded in 1978. Based in Italy they have manufacturing facilities and offices in all continents and sub-continents, and ship to over 120 countries. With a smart design, the AML200 is the right chemical injection pump to reliably feed chemicals into a system. With a PTFE diaphragm capable of outlasting any other diaphragm in the market, and a PVDF liquid end compatible to most chemicals in the market, it is built to last in any application.
Capable of feeding up to 0.8 GPH at 145 psi, this pump can be manually adjusted to feed consistently the correct amount every single time. It is shipped with all the components so it can quickly be installed and start operation, out of the box. The unique suction foot valve, using a diaphragm valve and not a check valve, allows for continuous operation without losing prime due to the valve's orientation. Ready to be installed on a wall, panel or the floor, it can easily be operated and maintained.
We worship quality and reliability over bells and whistles. Try it out, and you will be converted!
Check your chemicals compatibility with PTFE and PVDF HERE!
MATERIALS USED IN THE PUMP HEAD
BALL VALVES Ceramic
SEAT VALVE FPM/EPDM
DIAPHRAGM FULL PTFE
The parts in contact with the liquid have been chosen in order
to guarantee perfect compatibility with most chemical
normally in use.
Check your chemical's material compatibility here!
These valves have a 24 months warranty on manufacturing defects! also:
We offer a 30-day money back guarantee on all products that have been purchased from us directly. All items must be returned as new in their original packaging, including all accessories and cables. Missing items will be charged based on suggested retail prices. All returns must be accompanied by a valid return authorization number (RMA) issued by us. If an RMA is not obtained prior to shipping, the returned product will be refused and returned to sender. Shipping cost is not refundable and returns must be shipped prepaid by the customer. To set up a return for refund please email email@example.com . Please be sure to include your order # and reason for returning in your email.
FLOW RATES 120 p.s.i. @ 1.3 GPH or 145 p.s.i. @ 0.8 GPH
POWER SUPPLY 100÷240 Vac 50/60 Hz (*)
STROKE RATE 160 strokes/minute
ENCLOSURE PP protection degree IP65
INSTALLATION KIT in PP included
Constant flow rate manually adjustable by control dial on the front panel, two
flow rate range:
l 0÷20% with switch in P position,
l 0÷100% with switch in C position,
Power-ON led indicator and level control input.
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
It has work just as advertised. I am very pleased with this product.
It is working just as advertised. I am very pleased with your product.
Very easy to install and it takes no room. Installed on a wall inside the containment. Easy to wash as it is not on the floor. Very easy to install and operate. Ordering was simple enough and pump was shipped when promised. All components required inside the box.
This pump is small, simple and easy to operate. It's low cost and reliability make it ideal for our applications. No need to carry three different models. This one everywhere!