Add Products to the Cart to Obtain Instant Discounts!

Corrosion

Corrosion test coupons

100100-PW

$ 8.50

Question? Call us:+1-800-613-2974

Email us: Sales@yamathosupply.com

Accurate monitoring of corrosion rates in any environment is critical when viewed in terms of the maintenance and repair costs associated with corrosion and material failure. Test coupons provide an inexpensive means of on-line monitoring that will allow you to effectively measure the corrosivity within your system. By observing the mils-per-year corrosion rate of an exposed coupon, valuable information can be provided regarding the material's life expectancy.

Actual Dimensions: ½ inch (12.7 mm) wide, 3 inch (76.2 mm) in length, and 1/16 inch (1.6 mm) thick

• To provide a basis for estimating service life of process equipment.
• To provide an insight into corrosion mechanics.
• To compare resistance of one alloy to another.
• As a quality control test for a given heat of alloy.
• Pre-weighing and post-weighing of coupons available upon request.

 

Part Number               Material                                        Hole Size
100100             C101D Steel                                                  3/16"
100200            Copper, CDA110                                          3/16"
100300            Admiralty Brass                                          3/16"
100400            Galvanized Steel                                         3/16"
100500            Copper Nickel, 90/10                                3/16"
100600            Aluminum, 7075-T6                                  3/16"
100700        Type 304 Stainless Steel                             3/16"
100800        Type 316 Stainless Steel                             3/16"
100900            Mesh Bio Film                                              3/16"
101000      Deposition/Scale Coupon Steel C1010     3/16"


Made in the USA.


Finishes

Coupons can be furnished with a variety of finishes depending on your particular application. Some of the typical finishes available are defined below.
Mill: Finish as produced from mill
Glass Bead: Blasted with fine glass beads to remove mill scale
120 Grit: Fine finish commonly used in corrosion tests, such as, pitting studies where smooth surface finish is desired. Finishes up to 600 grit (extremely fi ne) can be provided.

    Click to edit the product in Ali Orders.
    Note: only show for shop owner